(AP492.500) Gel Rust Spot Remover

Stock Code:


Rust Remover is a "Safe-chemical" formulation for removing rust spots on fibres and carpets. Rust Remover is formulated with a blend of wetting agents, which allows for a fast and efficient chemical action on deep-set spots. It replaces the traditional option of Hydroflouric Acid, which is extremely corrosive with a high hazard profile. 


  • Rust Remover provides a safer alternative to Hydrochloric Acid and Hydrofluoric Acid
  • Highly effective against old, dried blood spots (pretesting is always recommended)
  • Rust Remover quickly and effectively penetrates discoloured fibres, with the inclusion of super wetting and penetrating agents, resulting in not just treating the outside of the fibre, but penetrates the fibre.
  • Rust Remover has a low odour formula
  • Rust Remover is safe on all synthetic and natural fibres (although fine fabrics must be pre-tested for colour stability before use)


Severe contamination: Undiluted

Use on upholstery or lesser affected area: 1 part Rust Remover and 1 part water

Directions of use:

  1. Prepare dilution (if required)
  2. Spray apply the solution onto the fibre or fabric until it is wetted out.
  3. Agitate solution using a carpet rake or upholstery cleaning brush
  4. Allow 10-20 minutes reaction time
  5. Rinse extract using Rinse Pro
  6. Allow drying. Increasing ventilation will assist in drying